Biggleswade

Biggleswade leak detection for supply pipes, floors and heating systems

A market town of Victorian terraces with a new town bolted on at Kings Reach. Charlie finds leaks in both without digging up the garden.

No find, no fee

External leaks traced

Underfloor heating

Quick bookings

Get a quote

Tell us what you have noticed and where. We ring you back to talk it through. No find, no fee.

No find, no fee

24/7 enquiries

Non-invasive methods

Reports for insurance claims

Biggleswade has doubled in size with the estates east of the A1, and the new houses bring underfloor heating in every ground floor. The old town along the High Street and Shortmead Street is Victorian terraces on Anglian Water's supply, with pipes under narrow front paths. The two fail in different ways.

Water leak detection in Biggleswade for an Anglian high usage letter, or a trace on a heating loop, can usually be booked within 24 to 48 hours.

Water meter chamber at the boundary of a Bedfordshire house Leak detection engineer using a thermal imaging camera inside a Bedfordshire home

What a Biggleswade survey looks like

1

Phone first

Charlie asks whether the meter is moving, the boiler is dropping or the floor is wet, and whether the house is old town or new estate. That sets the kit and the price.

2

Confirm which pipe

The supply is checked at the meter with everything off. The heating, or each underfloor loop in turn, gets a pressure test. The one losing water is the one traced.

3

Mark it and write it up

The leak point is marked and photographed. The written report with readings and thermal images goes to you the same day, for the repairer, the insurer or Anglian Water.

External leak detection in Biggleswade and inside the house

Acoustic listening

An external supply pipe leaking under a path or lawn hisses under Anglian's mains pressure. The ground microphone is run along the route and the loudest point is the dig.

Thermal imaging

Underfloor heating loops in a Kings Reach house show on the camera through the screed once warm. The leak is the patch where heat spreads beyond the pipe spacing.

Tracer gas

A radiator circuit or a loop losing pressure is drained and charged with hydrogen in nitrogen. The gas surfaces at the fault and a hand held detector reads it.

Leaks we have traced around Biggleswade

On the Kings Reach side a new house was losing pressure within days of each top up. At the manifold one underfloor loop dropped while the rest held, the thermal camera showed where it ran, and tracer gas peaked beside the patio door where a fixing had gone through the pipe. In the old town a terrace near the High Street had a water company letter and nothing wet indoors; the supply pipe under the narrow front path was leaking at a joint by the wall, found with the ground microphone. A shop in the centre with a high bill had a split under the stock room floor, surveyed before opening and marked for one small lift.

Nearby places we cover

Langford, Sandy, Potton, Stotfold, Arlesey, Dunton and the villages along the A1 are covered from this page on no find, no fee terms. Kempston has its own page, and the Bedfordshire page lists the rest of the county.

Trace and access in Biggleswade

Trace and access cover pays for locating the leak and reinstating the path, floor or wall opened to reach it. Insurers want to see the search was done with proper equipment. Our report sets out the method used, the readings, the thermal images and the marked leak point for them.

Questions people ask

Often, yes. A leak on the external supply pipe between the meter and the house shows on the meter with everything inside turned off. We trace the pipe with the ground microphone and mark the point, and you get a report to send to Anglian.

No. The ground microphone finds the leak through lawn, path and drive without digging. The report marks the spot so the repairer opens one small hole. The digging comes after the survey, and it is the repairer's job, not ours.

It can. Tell your builder or warranty provider before anything is opened. Our report gives a loop by loop pressure test and a marked point, which is the evidence they ask for, and we can time the visit to suit them.

Yes. Sandy, Potton and the villages between are covered on the same booking. Price and timing are agreed on the phone before we set off, and the no find, no fee promise applies.

We can usually book you in within 24 to 48 hours. Ring, describe what you have seen, and we will give you a price and a day for the visit.

Book Biggleswade leak detection

Ring us with what you have seen and get a price and a day.

Landline 01440 840 772. Email hello@completeleakdetection.co.uk.