1
Start with the symptoms
On the phone Charlie asks about the meter, the boiler gauge and anything you have seen or heard.
Leak detection in Sandy
Charlie covers Sandy and locates leaks in the town's light soil with instruments rather than trial holes.
No find, no fee
On the A1, easy to reach
Report for insurance claims
Tell us what you have noticed and where. We ring you back to talk it through. No find, no fee.
No find, no fee
24/7 enquiries
Non-invasive methods
Reports for insurance claims
Sandy takes its name from the ground it stands on. The town sits on the Greensand Ridge where it meets the Ivel, with the A1 on one side and the railway on the other, and the soil drains so freely that it made this a market gardening area. For a leak that is bad news: water from a broken supply pipe disappears into the sand and never reaches the surface.
So water leak detection in Sandy leans on the meter and on instruments rather than on looking for wet patches. The older streets near the station and the market square have Victorian houses with mixed pipework. The estates up towards the RSPB reserve at The Lodge and out along the Potton road have heating in solid floors and supply pipes under drives.
1
On the phone Charlie asks about the meter, the boiler gauge and anything you have seen or heard.
2
Charlie shuts the house off and reads the meter to prove or clear the supply pipe. The heating circuit is pressure tested. The leaking system is confirmed before any scanning.
3
Thermal imaging finds the area, acoustic listening or tracer gas finds the point. Charlie marks the position, photographs it and writes it up for the repair and any claim.
Underfloor heating leak detection in Sandy starts with the camera. A leaking loop under screed shows as a warm patch spreading beyond the pipe, while a healthy loop shows as even stripes.
External leak detection in Sandy depends on sound, because the ground gives nothing away. A ground microphone along the supply pipe picks up the hiss and peaks over the break.
Hydrogen in nitrogen is put into the drained pipe and traced at the surface with a detector. Sandy ground lets the gas rise freely, which makes this method work well here.
Earlier this year we were called to a 1960s house off the Potton road where the boiler needed topping up every few days and nothing showed on the floor. A pressure test confirmed the loss, the thermal camera picked out a warm strip across the hall, and tracer gas put the split in a heating pipe under the solid floor by the back door. Another job was a Victorian terrace near the station with a water bill that had doubled. The meter turned with every tap off, so we listened along the supply pipe and found the break under the front path, in sand that had swallowed every drop.
Biggleswade is five minutes south on the A1 and Potton is a few minutes east. Bedford is a short drive west along the A603, with Shefford to the south west. We cover all of them, so Sandy is on a route we drive often for leak detection in Bedfordshire.
If your home policy includes trace and access, the cost of finding the leak and of reinstating what is opened to reach it is normally met by the insurer. Our report records the tests, the meter and pressure readings, the thermal images and the marked position.
Call us on 07897 020 680 and have your meter reading ready.
Landline 01440 840 772. Email hello@completeleakdetection.co.uk.