Leak detection in Poringland

Leak detection in Poringland for houses with solid floors

Poringland is on the south side of Norwich, so it falls on the same run as Charlie's city jobs. He brings the thermal camera, ground microphone and tracer gas kit to every visit.

Nothing to pay if nothing found

Paired with Norwich visits

Claim ready report

Solid floors are familiar ground

Get a quote

Tell us what you have noticed and where. We ring you back to talk it through. No find, no fee.

No find, no fee

24/7 enquiries

Non-invasive methods

Reports for insurance claims

Poringland was a village and is now nearly a town. Most of it was built from the 1960s onwards, estate by estate, with older houses along The Street and the Bungay road. That means solid concrete floors nearly everywhere, radiator pipes in screed, and in the newest homes underfloor heating loops. A leak in any of those stays hidden until the boiler gauge gives it away.

Anglian Water supplies Poringland and Framingham Earl. The supply pipe from the pavement is short on most estate plots, so when the meter moves with the house switched off the fault is often under the drive or just inside the front wall.

Water meter chamber at the boundary of a Norfolk house Leak detection engineer using a thermal imaging camera inside a Norfolk home

Finding a leak in a Poringland house

1

The call

Charlie asks how often you top up the boiler, whether any floor feels warm and if the meter moves when nothing is running. That tells him whether it is heating, supply or plumbing before he sets off.

2

Tests at the house

A meter check with the stopcock open and the house closed, then a pressure test on the heating. If both hold, the search moves to the hot and cold plumbing.

3

The exact spot

Thermal imaging maps the pipe runs under the screed. Tracer gas or acoustic listening confirms where the water is getting out. Charlie marks the point, photographs it and talks through the repair.

Kit for screed floors and estate plots

Thermal imaging

On a solid floor the camera shows the heating pipes as warm lines with the system running. A break in the line, or a wider warm blur, marks where water is spreading through the concrete.

Acoustic listening

A short supply pipe under a Poringland drive is ideal for the ground microphone. Our engineer takes readings every half metre along the pipe and the leak is where the noise peaks.

Tracer gas

For underfloor heating or a pipe with no clear heat trace, the circuit is drained and filled with a safe hydrogen mix. The gas rises through the screed at the leak and a detector finds it.

Leaks we have traced around Poringland

A 1970s house on one of the estates had a boiler that needed topping up every week and a hall floor that felt warm underfoot. We mapped the pipes with the thermal camera, then put tracer gas through the heating and the detector peaked under one floor tile by the lounge door. A newer home with underfloor heating was losing pressure on one loop, which was isolated at the manifold and traced the same way to a spot under the kitchen floor. And a bungalow on the road out towards Bungay had a meter turning with everything off. The supply pipe under the drive was short, and the ground microphone found the split a metre inside the gate.

Nearby places we cover

Norwich is ten minutes north and Thorpe St Andrew and Brundall are across the river. Hethersett and Wymondham lie west on the A11. Framingham Earl, Stoke Holy Cross and Brooke are part of the Poringland round.

Using trace and access cover in Poringland

If the leak is in a screed floor, the cost of finding it and breaking out to reach it is normally covered by the trace and access section of your buildings policy. Our report names the pipe, shows the thermal evidence and marks the position on a photograph, so claims handlers can work from it directly.

Questions people ask

No. The thermal camera shows every loop and tracer gas pinpoints the break. Our engineer marks an area a few inches across, so the floor is only opened at that one point for the repair.

The same as anywhere else we cover: a visit within 24 to 48 hours in most cases. Poringland is easier than most because it pairs with Norwich, so ringing in the morning gives a fair chance of the following day.

Turn everything off and read the meter twice, an hour apart. If it moves, water is leaving the supply pipe or the plumbing. Tell us the two readings when you call and we can usually say which.

Yes. The two run into each other and our engineer treats them as one place, along with Framingham Pigot and Caistor St Edmund.

Then our engineer tells you, and the detection is free under no find, no fee. A pressure drop with no leak on the circuit usually means an expansion vessel or relief valve, which a heating engineer can deal with.

Book a Poringland visit

Call us on 07897 020 680 and have your last two meter readings to hand if you can.

Landline 01440 840 772. Email hello@completeleakdetection.co.uk.